Hi,

I'm having lots of difficulties with BCM5719, which is the default
network card of HP Proliant DL 360 G8 servers. I can get a few ping
replies before I get a couple of these:

bge0: watchdog timeout -- resetting                                            
bge0: watchdog timeout -- resetting                                            

Then everything hangs. Can not log in using ssh.

I'm running: FreeBSD-9.0-RELENG_9-20120701-JPSNAP-amd64

Info about the NIC:

# devinfo -rv | grep phy                                      
                brgphy0 pnpinfo oui=0x1be9 model=0x22 rev=0x0 at phyno=1        
                brgphy1 pnpinfo oui=0x1be9 model=0x22 rev=0x0 at phyno=2        
                brgphy2 pnpinfo oui=0x1be9 model=0x22 rev=0x0 at phyno=3        
                brgphy3 pnpinfo oui=0x1be9 model=0x22 rev=0x0 at phyno=4        
# grep bge /var/run/dmesg.boot                                
bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem
0xf6bf0000-0xf6bfffff,
0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 at device 0.0 on pci3        
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E              
miibus0: <MII bus> on bge0                                                      
bge0: Ethernet address: 2c:76:8a:54:08:14                                      
bge1: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem
0xf6bc0000-0xf6bcffff,
0xf6bb0000-0xf6bbffff,0xf6ba0000-0xf6baffff irq 36 at device 0.1 on pci3        
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E              
miibus1: <MII bus> on bge1                                                      
bge1: Ethernet address: 2c:76:8a:54:08:15                                      
bge2: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem
0xf6b90000-0xf6b9ffff,
0xf6b80000-0xf6b8ffff,0xf6b70000-0xf6b7ffff irq 32 at device 0.2 on pci3        
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E              
miibus2: <MII bus> on bge2                                                      
bge2: Ethernet address: 2c:76:8a:54:08:16                                      
bge3: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem
0xf6b60000-0xf6b6ffff,
0xf6b50000-0xf6b5ffff,0xf6b40000-0xf6b4ffff irq 36 at device 0.3 on pci3        
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E              
miibus3: <MII bus> on bge3                                                      
bge3: Ethernet address: 2c:76:8a:54:08:17                                      

Searching other bug reports and posts, I've tried:

hw.bge.allow_asf="0"                                                            
hw.pci.enable_msi="0"                                                          

But it didn't help. Any ideas?

If I don't use the loader.conf settings above, I also get (before the
watchdog timeouts):

bge0: 2 link states coalesced                                                  
bge0: 2 link states coalesced                                                  
bge0: 2 link states coalesced                                                  

Best regards,

--
Anders.
_______________________________________________
freebsd-stable@free... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe@free..."