Beste Hans,
> Please go with svn, I feel better that way :-)

I've just gone with svn. First test (not using mythtv, I'm @ workplace.. ssh
only) seems to be ok. I've compiled the svn version. Tuned the tuners
and did a
cat from both /dev/video0 and /dev/video1 to different mpg files. Pulled them
over to my local machine and both have video and sound.

I'll do an extensive test tonight @ home.

> Install the latest svn version, reboot, test and post your dmesg output
> (the usual bits between IVTV START and END). If you are using any module
> options then please remove them first. Can you also give (again) a
> description of what your problem is? I got confused by all the different
> problems floating around :-)

My problem:
having no sound with mythtv on tuner 2 watching liveTV during a recording
session on tuner 1. Tuner 1 does have sound, I've checked the recordings of
tuner 1.

Strange things: I don't have that issue while watching LiveTV with PiP, I can
switch the channels with the N button and audio of the right tuner comes up.

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.9 (development svn snapshot revision 2702) loading
ivtv: Linux version: 2.6.13-sempron-r1 preempt K8 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [LNKB] -> GSI 19 (level,
low) -> IRQ
19
tveeprom: Second (radio) tuner idx 101
tveeprom: ivtv version
tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 7966089
tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 =
0x00400e17)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
ivtv: This is the first unit of a PVR500
tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
TEA5767 detected.
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60]
tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
type set to 62 (Philips TEA5767HN FM Radio)
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #0 ok [client=cx25840, addr=44]
ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b]
tda9885/6/7: (ivtv) chip found @ 0x86
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv: Detected a TEA5767 radio tuner. Enabling radio support.
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv: Create encoder radio stream
tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c
driver #0
ivtv: Initialized WinTV PVR 500 (unit #1), card #0
ivtv: ======================  NEXT CARD  ======================
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI Interrupt 0000:03:09.0[A] -> Link [LNKC] -> GSI 18 (level,
low) -> IRQ
20
tveeprom: Second (radio) tuner idx 101
tveeprom: ivtv version
tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 7966089
tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 =
0x00400e17)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv: i2c attach to card #1 ok [client=cx25840, addr=44]
ivtv: i2c attach to card #1 ok [client=wm8775, addr=1b]
tda9885/6/7: (ivtv) chip found @ 0x86
ivtv: i2c attach to card #1 ok [client=tda9887, addr=43]
ivtv: This is the second unit of a PVR500
ivtv: Correcting tveeprom data: no radio present on second unit
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c
driver #1
ivtv: Initialized WinTV PVR 500 (unit #2), card #1
ivtv: ====================  END INIT IVTV  ====================

Now I'm not sure if I should get the "buggy" firmware message. I guess so.
Gentoo ebuilds all tell me to link /lib/modules/HcwFalcn.rom to
ivtv-fw-end.bin
Is that correct? Or should the pvr-150mce / pvr-500mce still use the
ivtv-fw-enc.bin that comes from the .exe file
(ftp://ftp.shspvr.com/download/wintv-pvr_250-350/win9x-2k-xp_mpeg_wdm_drv/pvr48wdm_1.8.22037.exe)


Jelle Kalf.




-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
ivtv-devel mailing list
ivtv-devel@list...
https://lists.sourceforge.net/lists/listinfo/ivtv-devel